Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

Making a Half Doll Whole – Reen’s Way

Having just finished a half doll, I decided that for this one I will try to show you how to make one my versions of a pin cushion doll.  Since I never expect to use pins in mine, I will use only Polyfil as the stuffing.  Please be sure to use a stuffing that is kind to your pins and needles should you decide to use it as a true pin cushion.  I also do not intend to make this firmly stuffed as I’d like the skirt to hang more loosely.  To make it stiff enough to hold up, I added a dowel up the center (see this in the pin cushion portion of the instructions.)  An actual pin cushion should be as firmly stuffed as possible and will not require a dowel.

Here is the antique half doll I’ll be dressing.

IMG_0001 

Before beginning, adjust your mind to thinking “cut the bulk!”  The waist on the one I’m going to finish has a diameter of 3/4” which is really tiny.

Lots of people who dress these dolls now use fabric glue in places.  Often, glue is the answer.  I try to stitch when I can and I would never put glue directly on the glaze of an antique half doll. 

First you want to decide what the final height should be.  I’ve found that measuring the half doll from the top of the head (not including piled on hair, etc.) to the waist (not the bottom of the half doll) is ~1/3 of your final doll with the skirt.  This one is 2 1/4” so her skirt will be in the neighborhood of 4-5” and I will adjust it for the most pleasing proportions at the pin cushion stage. 

Before I begin dressing her, I’ve sewn some narrow, doubled over strips of twill tape at the hole areas in the base.  I prefer this to actually sewing the half doll to the pin cushion through the holes as it’s awkward to handle.  I can then spread the twill tape out over the pin cushion and secure it easier and more securely.  You can also run the twill tape through the holes but I like the former technique.

IMG_0004

TOP

Most half dolls have the top of the dress already molded on and painted.  Many even have hats.  You can skip this portion of the tutorial if that’s the case.  Since this one is nude, I had to make a fabric bodice. 

There are also some really beautiful reproductions out there.  Be sure they are painted nicely!

I’ve decided to dress this half doll using silk ribbon and antique lace.  I have used 1 1/4” silk ribbon for the under bodice and will fit lace overtop to dress it up.  The ribbon is just wide enough to cover her bosom down to her waist and I cut it long enough to fit around the doll’s body.  Fold under one back edge and use a little piece of scotch tape in the center front to hold it in place.  It needs to be stitched quite tightly down the back especially at the top so that her bosom holds it up.  I didn’t worry about making this stitching neat as it’s going to be covered with lace.

IMG_0006 IMG_0007

The overtop lace is sewn the same way with the pretty edge of the lace up toward the neck.  I then stitched a length of silk buds and bows that embellishes the neckline and goes down the back of the dress to cover the stitching there.  Any narrow trim or lace will work here...run a gathering line along one edge as straight edge trims will not follow the top of the bodice without puckering.

IMG_0008 IMG_0009

PIN CUSHION

You will need a stiff circle to act as the bottom for your pin cushion doll regardless of whether you stuff firmly or use a dowel as in the following paragraph.  I used a 1/8” thick cardboard circle with a diameter of 3 1/2” for the size head I am using.  You can glue several layers of a thinner cardboard together to make it stiff enough.

(optional)  Because, I am not making a true pin cushion, as I said before, I used a 3/8” dowel which fit well inside the half doll.  Slip the head on the dowel and make a pencil mark at the bottom of the half doll.  Remove head and measure down from that mark the length you want your skirt to be and cut the dowel.  I glued a wooden spool to the center of the cardboard bottom and then glued the dowel into the spool for stability.  Do not put any glue into the half doll.  She will be added later and the twill tape will secure her.  Again, you will not need to do this part if you are going to firmly stuff the pin cushion.

IMG_0010

Cut a fabric circle a scant 1/4” larger than the circle and a strip of fabric ~2” wider than the length you want your skirt and long enough to go around the circumference of the circle with enough to turn in both edges.  Leaving the strip open on the ends, turn and press the ends to the back side about 1/4”.  With right sides together, pin the strip to your circle all the way around and overlap with the other end of the strip.  Machine stitch ~1/8” from the edge of the circle being sure to catch both layers of fabric (circle and strip) all the way around.

IMG_0011 IMG_0012

Turn to right side, insert the cardboard circle with or without the dowel, hand stitch the seam where you overlapped.  Run a gather stitch along the opening.  I like to run it overlapping a folded edge.  Stuff as desired.

Spread out the twill tape previously applied to the half doll, pin to hold, and stitch firmly along the edges of the tape.

IMG_0015 IMG_0016
IMG_0017 IMG_0019

IMG_0022

SKIRT

This is where there’s not much instruction as you will have to decide what your skirt will look like based on the fabrics you have.  You can choose to build a skirt right on the pin cushion as I did or sew one and dress the doll.  There will be more bulk for you to work around if you sew a skirt before dressing her.  I actually stitched on rows of 1 1/4” ruffled silk ribbon, one over the other, for the main skirt.  Lightweight silk fabric, ribbons, and trims are great to use.  Even after on your doll, silk can be steamed and shaped to lay where you want it.  You will see in this photo that I also made two rows of stitching on the pin cushion so that I could shape the skirt better.

IMG_0023

The following photo shows the main skirt finished.  See how far below the half doll the top of the skirt is.  This is what I meant my “cut the bulk.”  I’m still a good 1/2”-3/4” away from the tiny waist.

IMG_0024

The lace peplums are made by cutting 2 half circles in wide lace with the pretty edge left straight.  Gather along the curved edge and put one half circle on each side of the doll.  I still have not reached the waist.

IMG_0027

FINISHED

Her skirt ended up at a length of 5”.  I used the buds & bows silk trim to wrap her waist and to hide the top of the peplums.  I added a simple ribbon bustle. 

IMG_0028 IMG_0030

A Fuchsia to Embroider

It took a long time, but I now have 100 followers. As a gift for each of you, I have written up the instructions for an antique design I found in an old ribbon work book. The instructions in the book are strangely written and they called for things I’ve never heard of, not usable for me. As I worked the flower, I just kept a running record on the computer and in photos of what I did. If you should embroider this fuchsia design, it would be great to see a photo of yours.

photo 6

- Trace the design onto Golden Threads quilting paper (this paper is strong enough to last throughout all of the embroidery.) Use a black micro pen or other permanent marker. Since the paper is transparent you will be able to chose the direction of your motif with the fuchsias to the left or right of the leaves. Trim the paper leaving 1/2” all around the design.

- Pin the design to the surface of your fabric exactly where you want the design to be. Baste all around it in the 1/2” margin.

pattern

photo 1

- Using 2 strands of green embroidery floss and a back stitch, follow along all of the stem lines. Using 2 strands of the same or another green floss, whip the thread through and around each of the back stitches. I used the same color throughout as I like the stems to just be there and not standing out too much.

- Cut small pieces of batting and pad the area of the outer petals of the flowers and also the flower buds.

- Using 1 strand of floss and an outline stitch, do the stamen stems. I actually used regular sewing thread as I didn’t have the color floss I wanted. The thread seemed to cut into the paper as I worked so be careful if you use it not to destroy your pattern too much. Because you are using a traced pattern, and if this happens, you can always remove the pattern and put a fresh one on using the stitches that you’ve already made to place it correctly.

photo 2

Before I go onto the ribbon work, please visit this Google search of images to see all of the variations in color and shape that fuchsias grow. I chose to use colors that didn’t match any of these but that I like for the project I’m doing.

I used 13 mm silk ribbon throughout (You can also use 7 mm if you prefer on this size pattern, but definitely if you make the design smaller.)

- Leaves are first and are just a straight stitch. Use a large eye needle (I use a 14 chenille with 13 mm ribbon) and start your stitch on the end of the leaf and then go back into the fabric at the stem. You should shape each leave as you go to be sure the ribbon is lying on your fabric so that the edges will curl under on the majority of them. You can pull one edge of the ribbon in a little more than the other from the backside of your work. This gives the leaves a different slant. If one twists a little, that’s fine. It makes them look more natural.

photo 3

- Flowers are also straight stitches throughout but the order in which they are done is the key. Using the original drawing as a guide, work the petals that are under other petals first. We will start with the center petals shown here in purple. Stitch your petals from the outside (as you did the leaves) to the center of the flower. Use your needle to push the batting back underneath the ribbon. As with the leaves, work with each petal to get the direction of how the ribbon lays the way you want it. Sew the back ribbon instead of using knots to cut down on bulk. Work one flower at a time and cut your ribbon. Traveling along the back is a waste of ribbon and gives your needle more to get caught on as you move around your design.

photo 4

Next, do the outer petals of the flower and the buds in a contrasting color (burgundy on mine) and just follow the pattern, stacking the petals as shown in the design.

- The calyx of each flower and bud are two small straight stitches. You can use a 7 mm ribbon here if you like.

photo 5

- Remove paper. Tweezers will come in handy here. Be gentle, slow and deliberate and you won’t hurt any of the design.

- Add a bead or French knot at the end of each stamen stem.

Finally, let me know how you did on this, whether the instructions were clear or not, and any other critique you may have will be appreciated.

Enjoy Stitching!! Reen

Arm Chair Sewing Caddy

Over the two years my website was closed, I received several requests asking for me to sell the pattern for my Arm Chair Sewing Caddy.  I had no idea where it was.  Well, I finally found it and, rather than sell it, I have published it for anyone who wants to download a free copy.  I hope you enjoy the project and if you have any questions please contact me. Caddy C

Please go to my downloads page and you will see two files labeled “Sewing Caddy”. You should download the pattern file to your PC as it requires printing on legal size paper to get the right size. The instructions you can either download or print directly.

Antique Bonnet Pin Cushion

New Cushion

This picture is my rendition of the antique pin cushion shown below. 

Old Cushion

I often buy things that other people wouldn't touch because of their condition.  This one is drab and dirty but I thought the design was well worth saving.  I prefer a softer look so I left off the trim around the brim and flattened out the crown a little.  I hope you enjoy making one for yourself. 

Hat BrimPhoto As

  • Cut a 6 1/2" dia. circle of cardboard and a piece of Wonder Under.
  • Iron Wonder Under to one side of cardboard circle and remove paper.
  • Cut a 13" dia. circle of fabric (I used silk shantung.)
  • With Wonder Under side of cardboard up, center fabric and iron it to the cardboard.
  • Turn over and hand pleat the fabric to the other side, pinning as you go.  It should look like this photo.  Baste fabric to hold near the center of the circle.

Hat Crown

  • Cut a 3 1/2" dia. circle of cardboard and put a 1 1/2" dia. hole within it (this will be where the stuffing for your pin cushion goes in.)
  • Cut a 7" dia. circle of fabric that matches your brim and a 7" dia. circle of fabric to use as a liner (I used muslin.)
  • Place the two fabric circles together and run a gathering stitch 1/4" in all the way around the edge.  I did this by hand, but machine stitching will do fine.
  • Start gathering this edge up and as it forms a pocket, place the cardboard with the hole inside.
  • Continue to gather until the 1/4" edge of the fabric will go around the edgePhoto Bs of the cardboard circle.  Glue this edge down to the cardboard and set aside to dry.  Stuff firmly through the 1 1/2" hole.  (Use wool roving when you start filling as it is better for the life of your pins and needles and fill in the bottom with Polyfil to save on expense.)  Put a small hole in another 3 1/2" dia. cardboard circle and glue this to the bottom and allow to dry thoroughly.  It should look like this photo when finished.

Tufting:  Thread a button through one hole and leave a long tail.  Using a doll making needle, go up through the hole in the cardboard and through the center of the stuffed crown.  Use a very strong thread for this (I used dental floss.)  Rethread into a needle that will go through your button and rethread to the doll making needle again to go back down through the other hole in the button you started with.  Do this one or two more times for strength.  At the bottom, tie the tail you left earlier with the end of your thread, pull tightly and tie a firm knot.

Assembly:  Center and Photo Csglue the crown to the pleated side of your brim and allow to dry.  You can now slip stitch the crown to the brim around the edge.  This photo shows how it will look before embellishment.

Finally, decorate your hat pin cushion as desired.  Add lace, ribbon, flowers to make it truly your own.  Because the bottom is flat, you can add a pretty cording or a ring to the back for hanging.  Hang it in a special place and you'll always know where your pin cushion is.

New CU

Feather Fan

You will need light to medium weight fabrics for this fan (I used silk shantung) and a light-weight fabric for the lining (I used silk organza.) Click here to download a file with the instructions and a pattern. Cut one of panel #1 and four of panel #2 from your fabric. Do not cut your lining but use your panel as the pattern to cut after sewing. This helps to cut down on fraying. With right sides together place the cut panels on your lining, pin and sFeather Fantitch leaving open the areas indicated on the pattern. Cut out your lined panels, clip curves to within a tiny fraction of the seam, turn and shape each panel while pressing. Proper pressing is important for this fan. Use the point of your iron and go carefully around the seamed edge and use a blunt point, such as a knitting needle, on the inside to smooth out the seam as you press.
Using the printed fan layout provided, start on the right side and line up one of panel #2. Pin the next panel #2 over the open edge. Pin on  the final panels in this way putting panel #1 on last. Do not stitch the panels together until you finish with the fan bottom in case an adjustment in the span is needed.
Trace the fan bottom onto the back of your lining and place your lining and fabric right sides together. Stitch around the traced line. Cut out the lined bottom leaving 1/4" fabric allowance. Clip curves and make a slit in your lining just large enough to turn the bottom to the right side. Press carefully as you did with the panels. Lay this over the pinned panels and adjust the pieces to fit. Pin the bottom in place and appliqué stitch all pinned seams. Finish any embellishment now or after you have stitched the fan to your CQ project.
Note: You should think about the embellishment you want before you begin your fan. I had to iron the transfers onto my fabric before I cut out the panels.

Victorian Fan

You will need a knowledge of paper piecing to make this fan. Click here to download a file with the instructions and a pattern. Cut a piece of muslin larger than the total fan. Trace the fan onto the muslin in reverse as you would for paper piecing. Your fabric will go on the clean side of Purple Fan Cropped 2the muslin and you will stitch on the traced solid lines. Use a dark fabric on the narrow panels of the fan (I used black) and lighter fabric or fabrics on the wide panels. This fan will not be easily made using heavy or tricky fabrics such as velvet. Mine is made entirely of silk dupioni but other lightweight fabrics are fine. The outside dashes mark the seam allowance and the dashes down the wide panels in the fan mark the center for you to embellish. I personally think this fan looks more dimensional if you do not embellish the dark narrow panels.
After all embellishing is done, and with right sides together, use a lightweight fabric (I used silk organza) and stitch the top jagged edge of the fan along the dashes shown in the pattern. This stitch line has a 1/4" allowance. Carefully clip down into the V shapes along this edge, turn to the right side and using the point of your iron, press this seamed edge.
Cut the pattern for the bottom of the fan out of freezer paper. Iron it to the wrong side of your fabric and cut around the freezer paper leaving 1/4" of the fabric above the curved part of the freezer paper pattern. Clip along this part not quite to the freezer paper, press this edge over, remove the freezer paper and press again. Now appliqué stitch this along this same curve to the bottom of the fan and embellish.
This fan can go right into the corner of one of your squares or the 1/2" side seams can be pressed to the back and the entire fan can be appliquéd in any position desired.

Ribbon Doll Tutorial


She's finished and I hope you will take advantage of the free instructions I am providing (see link below.) These include a full size pattern that you can print. For those of you who want the doll available to you in kit form, please visit my website (see link below.)

The kit includes the ribbon doll on a fabric sheet with light weight fusible interfacing ironed to the back, 2 yards of 1" silk satin ribbon for the skirt and 1/2yard of 1" wide lace for the skirt bottom and bonnet. Silk ribbon in 4mm and 7mm are needed but are not included. You may also want to add some seed beads. At present I have her in two colors with more to be added soon - as well as smaller versions.

Click here to download or print the instructions!

Click here to order the available kits!